Skip to content
كـورس CCNA 200-301
- تم تحديث الدمبز
كورس ENCOR 350-401
كورس CCNP 300-410 ENARSI
دورة بناء شبكة متكاملة
CCNA 200-301 dumps(تحديث جديد)
قناتنا في اليوتيوب
PPPoE is composed of which two phases?
Active Authentication Phase and PPP Session Phase
Passive Discovery Phase and PPP Session Phase
Active Authorization Phase and PPP Session Phase
Active Discovery Phase and PPP Session Phase
Which statement is true about the PPP Session Phase of PPPoE?
PPP options are negotiated and authentication is not performed. Once the link setup is completed, PPPoE functions as a Layer 3 encapsulation method that allows data to be transferred over the PPP link within PPPoE headers.
PPP options are not negotiated and authentication is performed. Once the link setup is completed, PPPoE functions as a Layer 4 encapsulation method that allows data to be transferred over the PPP link within PPPoE headers.
PPP options are automatically enabled and authorization is performed. Once the link setup is completed, PPPoE functions as a Layer 2 encapsulation method that allows data to be encrypted over the PPP link within PPPoE headers.
PPP options are negotiated and authentication is performed. Once the link setup is completed, PPPoE functions as a Layer 2 encapsulation method that allows data to be transferred over the PPP link within PPPoE headers.
A corporate policy requires PPPoE to be enabled and to maintain a connection with the ISP, even if no interesting traffic exists. Which feature can be used to accomplish this task?
Peer Neighbor Route
Prior to enabling PPPoE in a virtual private dialup network group, which task must be completed?
Disable CDP on the interface.
xecute the vpdn enable command.
Execute the no switchport command.
nable QoS FIFO for PPPoE support.
A network engineer has been asked to ensure that the PPPoE connection is established and authenticated using an encrypted password. Which technology, in combination with PPPoE, can be used for authentication in this manner?
Which statement is a restriction for PPPoE configuration?
Multiple PPPoE clients can use the same dialer interface.
Multiple PPPoE clients can use the same dialer pool.
A PPPoE session can be initiated only by the client.
A PPPoE session can be initiated only by the access concentrator.
Refer to the exhibit.
interface Ethernet 0
pppoe-client dial-pool-number 5
pppoe-client ppp-max-payload 1500
interface Dialer 1
ip address negotiated
dialer pool 5
Which statement about the configuration is true?
This configuration is incorrect because the MTU must match the ppp-max-payload that is defined.
This configuration is incorrect because the dialer interface number must be the same as the dialer pool number.
This configuration is missing an IP address on the dialer interface.
This configuration represents a complete PPPoE client configuration on an Ethernet connection.
Which command configures a PPPoE client and specifies dial-on-demand routing functionality?
interface dialer 1
Which command instruct a PPPoE client to obtain its IP address from the PPPoE server?
ip address negotiated
ip address dhcp
ip address dynamic
Which two configurations can a PPPoE client support? (Choose two)
Eight clients are configured on a single CPE
The client is connected to multiple hosts over DMVPN
The client is installed on the same network device as the server
The client is connecting over an ATM PVC
The client is installed on a native IPv6 network
Which DSL encapsulation method requires client software running on the end-user PC that is directly connected to a DSL modem?
Which two commands do you need to implement on a router to support PPPoE client?
peer default ip address pool
pppoe enable group
Go to Top